Filter
Top Products
6 ‘05-’06 Frontier Leveling - Kit NL221
After Completing Installation
Engine Compartment
1. Connect both battery cables. Connect positive cable
first, then negative cable.
Miscellaneous
1. Apply kit label (warning) onto dashboard in plain
sight of all vehicle occupants.
2. Adjust headlights.
3. Check all fasteners to ensure they are tight.
4. Ensure all wires, hoses, cables, etc. are properly
connected and there is ample slack.
5. Align vehicle to O.E. specifications. Retain align-
ment results.
Dynamic Vehicle Check
1. Check steering and suspension in all positions to
ensure that there is no bind and adequate clearance
between all moving, fixed, and heated members.
Check operation of clutch, brake system, and park-
ing brake. Check operation of transmission and
transfer case. Ensure there is full engagement in all
gears and 4WD ranges. Check battery connections
and electrical component operations. Test-drive
vehicle.
CAUTION
A vehicle wheel alignment MUST be performed to pre-
vent improper ride/handling characteristics and/or
excessive tire wear.
WARNING
Retorque all fasteners after 500 miles and after off road
use. All suspension lift components should be visually
inspected and fasteners retorqued during routine vehi-
cle servicing.
Positive
Cable
Battery
Negative
Cable
Kit Parts List
Qty. Description
CAUTION
Performance Automotive Group does not recommend
any particular wheel and tire combinations for use with
its suspension lifts and cannot assume responsibility
for the customer’s choice of wheels and tires. Refer to
your owner's manual for recommended tire sizes and
warnings related to the use of oversized tires. Larger
wheel and tire combinations increase stress and wear
on steering and suspension components, which leads
to increased maintenance and higher risk for compo-
nent failure. Larger wheel and tire combinations also
alter speedometer calibration, braking effectiveness,
center of gravity, and handling characteristics. Consult
an experienced local off road shop to find what wheel
and tire combinations work best with your vehicle.
NOTE
All warranty information, instruction sheets, and other
documents regarding the installation of this product
must be retained by the vehicle owner
. Information
contained in the instructions and on the warranty card
will be required for any warranty claims. The vehicle
owner needs to understand the modifications made to
the vehicle and how they affect vehicle handling and
performance. Failure to provide the customer with this
information can result in damage to the vehicle and
severe personal injury.
1 Label (logo)
1 Label (warning)
2 Spacer (lower)
2 Spacer (upper)
1 NL221BAG (Hardware Bag)
6 Bolt (M10-1.50 x 50)
6
Nut (M10-1.50 Stover)
Copyright 04/06
Performance Automotive Group
www.p-a-g.net