Filter
Top Products
4 ‘05-’06 Frontier Leveling - Kit NL221
a. Scribe alignment mark lengthwise along upper
plate, coil spring, and shock for proper re-
assembly.
b. Using coil spring compressors, carefully com-
press coil spring until coil spring is loose on
shock.
c. Remove nut, washer, bushing, upper plate, iso-
lator, and shock from coil spring.
d. Remove three studs from upper plate.
Upper Plate
& Coil Spring
Alignment
Mark
Shock
Spring
Compressor
Coil Spring
Shock
Nut, Washer,
& Bushing
Upper Plate
Isolator
Studs
Upper Plate
e. Install kit spacer (lower) and three kit bolts
(10mm x 50mm) onto bottom of upper plate.
f. Install isolator onto kit spacer (lower).
Kit Spacer
(Lower)
Upper Plate
Kit Bolts
(10 x 50mm)
Isolator
Kit Spacer
(Lower)
Kit Bolts
(10 x 50mm)