3 ‘05-’06 Frontier Leveling - Kit NL221
Engine Compartment
1. Disconnect both battery cables. Disconnect negative
cable first, then positive cable.
Prepare to Install Front
Leveling Kit
1. Loosen, but do not remove, lug nuts on each front
wheel.
2. Using a hydraulic floor jack, slowly lift front axle until
front tires are 3-5” off ground. Position jack stands
under frame. Lower vehicle onto jack stands while
maintaining hydraulic jack pressure underneath
vehicle.
3. Remove lug nuts and front wheels from vehicle.
4. Remove two nuts and sway bar from two sway bar
links.
WARNING
Compressed coil springs can expand violently causing
serious personal injury. Use caution when using coil
spring compressors.
WARNING
Use extreme caution when lifting vehicle from ground.
To prevent serious personal injury, ensure the lifting
device is securely placed.
Positive
Cable
Battery
Negative
Cable
Sway Bar
& Nut
Sway Bar
Link
Lower
Control Arm
5. Driver side coil-over assembly
a. Remove nut and bolt from lower coil-over
assembly and lower control arm.
b. Remove three nuts and coil-over assembly from
upper perch.
c. Repeat above steps for passenger side coil-over
assembly.
Install Front Leveling Kit
1. Driver side coil-over assembly
WARNING
Compressed coil springs can expand violently causing
serious personal injury. Use caution when using coil
spring compressors.
WARNING
Compressed coil springs can expand violently causing
serious personal injury. Use caution when using coil
spring compressors.
Coil-Over
Assy.
Bolt & Nut
Lower
Control Arm
Coil-Over
Assy.
Nuts
Upper
Perch