Filter
Top Products
Black plate (311,1)
Model "Z51-D" EDITED: 2009/ 8/ 3
WARNING
. For AWD equipped vehicles, do not
attempt to raise two wheels off the
ground and shift the transmission to
any drive or reverse position with
the engine running. Doing so may
result in drivetrain damage or un-
expected vehicle movement which
could result in serious vehicle da-
mage or personal injury.
. Do not attempt to test an AWD
equipped vehicle on a 2-wheel dy-
namometer (such as the dynam-
ometers used by some states for
emissions testing) or similar equip-
ment even if the other two wheels
are raised off the ground. Make sure
that you inform the test facility
personnel that your vehicle is
equipped with AWD before it is
placed on a dynamometer. Using
the wrong test equipment may re-
sult in drivetrain damage or unex-
pected vehicle movement which
could result in serious vehicle da-
mage or personal injury.
SSD0418
ALL-WHEEL DRIVE (AWD) LOCK
SWITCH OPERATIONS
The AWD LOCK switch located on the lower
side of the instrument panel. This switch is used
to select the AUTO or LOCK mode depending
on the driving conditions.
Each time you push the lower part of the switch
*
A
, the AWD mode will switch:
AUTO ? LOCK ? AUTO.
LOCK mode
The AWD LOCK indicator light will
illuminate.
AUTO mode
The AWD LOCK indicator light will turn off.
AWD
mode
Wheel driven
AWD
LOCK
indica-
tor light
Use condi-
tions
AUTO
Distribution of tor-
que to the front and
rear wheels changes
automatically, de-
pending on road
conditions encoun-
tered
[100:0] ↔ [50:50].
This results in im-
proved driving stabi-
lity.*1
Turns
off.
For driving
on paved
or slippery
roads
LOCK All-wheel drive*2, *3
AWD
LOCK
For driving
on rough
roads
*1: When the rotation difference between the
front and rear wheels is large, the AWD
mode may change from AUTO to LOCK for
a while, however, this is not a malfunction.
ALL-WHEEL DRIVE (AWD ) (if so
equipped)
Starting and driving 5-21