Filter
Top Products
Black plate (278,1)
Model "Z51-D" EDITED: 2009/ 8/ 3
SAA1566
Activating Alternate Command Mode
When the Standard Mode is active, perform the
following steps to switch to the Alternate
Command Mode.
1. Push the SETTING button on the instrument
panel.
2. Highlight the “Others” key on the display
and then push the ENTER button.
3. Highlight the “Voice Recognition” key and
then push the ENTER button.
SAA2168
4. Highlight the “Alternate Command Mode”
key and push the ENTER button.
5. The confirmation message is displayed on
the screen. Push the “OK” key to activate
the Alternate Command Mode.
Displaying command list
If you are cont rolling t he system by voice
commands for the first time or do not know the
appropriate voice command, perform the follow-
ing procedure for displaying the voice command
list (available only in Alternate Command Mode).
SAA1545
1. Push the INFO button on the instrument
panel.
2. Highlight the “Voice Recognition” key using
the NISSAN controller and push the ENTER
button.
3. Highlight the “Command List” key using the
NISSAN controller and push the ENTER
button.
You can skip steps 1 and 2 above if you say
“Help”.
4-110 Monitor, heater, air conditioner, audio, phone and voice recognition systems