Nextar X3E GPS Receiver User Manual


 
FIRST STEPS
© gate5 AG, 2006. All rights reserved.
6
FIRST STEPS
Please make sure that the battery of your device is fully charged.
Switch on the unit and tap on NAVI or NAVIGATION in the first screen.
Choosing a language
If more than one language is available on your device, you are prompted to choose
your language.
Click on the flag representing your country/language.
On the following screen, choose the voice skins used for the voice
commands during navigation (e.g. female or male voice).
Safety precautions
Next, a screen with safety precautions will be shown.
Read those safety precautions.
Mark the Hide at startup checkbox to hide these notes for future
start-ups.
Press the forward arrow.
Set time
Your PND is able to automatically determine the time through the GPS signal. For this
purpose, you need to set your time zone.
Choose your time zone from the list. You can later change this (see page
27).
During Summer Time, please mark the corresponding check box in order to
adjust the time shown forward by one hour.
  Press the confirmation icon.