Filter
Top Products
6
3. Navigation
For your safety, enter destination information before you start a journey. Never operate the iCN 320 while driving.
After you have set up your iCN 320, the Go To screen will be displayed. This lists the different types of destinations that you can visit.
The destinations to which you can navigate fall into two broad categories - New Destinations and Saved Destinations. When you first use your iCN 320, you
will not yet have saved favorites, and will need to input the point to which you wish to navigate. You can navigate to either a Point of Interest (POI) or to a
specific area or street.
A. New Destinations
Navigating to a Point of Interest (POI)
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as car parks and
airports. Your iCN 320 comes with a number of POIs stored on its map.
1. To navigate to a POI, use the 4-way toggle to highlight
Points of Interest on the Go To screen and press OK.
The first time you do this, you may be asked to select your country. Use the 4-way toggle to highlight your country and press OK.
2. You can choose to either navigate to the nearest POI or choose from all available POIs. If you are searching for a specific POI, select All POIs using the
4-way toggle, and press OK. If you are looking for a convenient POI such as a nearby gas station, select Nearest POI and press OK. In this screen,
the right Selection Button also acts as an OK button.
3. In the Select POI screen, use the 4-way toggle to select the type of POI you are seeking, and press OK
.
4. The Keyboard screen will display. If you selected Nearest POI
in the earlier screen, the distance to the POI will be shown.
5. Use the 4-way toggle to move around the Keyboard screen. To select a character, press OK.
This will narrow your search. To delete a character, press the left Selection Button or select ; hold the left Selection Button to delete the line.
When you have entered the first few characters of your destination, or you can see your destination on the screen, press the right Selection
Button.
6. Use the 4-way toggle to highlight your preferred destination and press OK. Use the left and right Selection Buttons to scroll back and forth through
the list of possible destinations. If you are at the top of the list, pressing the left Selection Button will bring you back to the previous screen.
When you select a destination, your iCN 320 will display the Destination screen, which clearly shows your chosen destination.
Press the left Selection Button to return to the previous screen. Press the right Selection Button to confirm your destination. Your iCN 320 will
calculate your route, and guide you to your destination.
NOTE: The keyboard screen can be viewed in three modes
:
• To display the number/symbol Keyboard screen, select , then press OK;
•
To display the alternate Keyboard screen, which features accented characters, select , then press OK;
• To return to the alphabet Keyboard screen, select , then press OK.
NOTE: You can return to the Go To screen at any time by pressing the Home Button.
If you have programmed a trip, you can return to the navigation screens by pressing the left Selection Button on the Go To screen. If you have
not programmed a trip, pressing this button will open the GPS Status screen (see page 11).
Press the right Selection Button in the Go To screen to open the Preference
s screen (see Page 10).
NOTE: The POIs in your iCN 320 will vary depending on the map that you use.
NOTE: You can save this destination as a Favorite, use the 4-way toggle to select Save and press OK.
You will be guided to the Favorites screen. See page 9 for more on saving destinations.
Do not leave your iCN 320 attached to your windshield when not in use as prolonged exposure to heat may damage the device.