Navman iCN-700 Series GPS Receiver User Manual


 
iCN 700 series | How do I get started?
17
How do I get started?
Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will need to
purchase an external antenna for your iCN to receive GPS signals. For more information, see the GPS Frequently
Asked Questions guide.
To get started for the first time, complete the following steps:
Step Action
1 Turn your iCN on.
2 Select your preferred language.
3 Accept the warning message.
4 View the Tutorial.
1. Turn the iCN on
a) Position the iCN in your vehicle according to the instructions in the In-Car Installation Guide.
Please ensure that:
the iCN does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and safety
devices.
the GPS receiver is facing the sky directly above it, to allow it to obtain a GPS fix through the windshield.
the BATTERY switch is ON.
The BATTERY switch is GREEN when ON and RED when OFF.
b) Press to turn your iCN on.
The iCN will turn on and display the Language screen.
If your iCN was last turned OFF via the BATTERY switch, it will automatically turn on when the BATTERY switch is
switched ON.
If you have maps installed from multiple continents, you may be prompted to select the maps you would like to load
before the Language screen is displayed.
To use maps from a different continent at a later time, you must first reset your iCN, then select a different continent.