Filter
Top Products
Basic Operations
Starting the Device
December 2008 NAVIGON 2000S | 2200T Series User’s Guide 19
Version 1.1 NAVIGON, INC.
The following message displays:
4. After you have read and fully understood the text, tap OK.
The M
AIN WINDOW displays.
Using the Screensaver
In the MAIN WINDOW:
1. Tap Options > Settings > General.
The G
ENERAL OPTIONS PAGE 1 displays.
2. On P
AGE 3, in the Screensaver field, tap Yes.
3. Tap OK to save the change.
Selecting Day/Night Viewing Mode
In the MAIN WINDOW:
1. Tap Options > Settings > General.
On G
ENERAL PAGE ONE:
2. In the Display mode field, set the viewing mode. Options are:
Automatic Automatically switch between day and night display, based on
sunrise and sunset times.
Night Display with darker colors for night viewing.
Day Display normally for daytime use.
3. When finished, tap OK to return to P
AGE ONE.
4. Tap OK to save changes.
Note: If you do not accept these instructions, tap Cancel to exit the navigation soft-
ware.
You can change these settings at any time. For more information, see “General Set-
tings” on page 97.
Note: When enabled, the screensaver displays a slide show of pictures when you have
not touched the device after an extended period of inactivity.
Note: The screensaver is automatically disabled during navigation.
Note:
Change day and night brightness levels in the Brightness Day and the
Brightness Night fields.