Multiquip Qp4tZtMpXF Automobile Parts User Manual


 
PAGE 20 — QP4TZT10P/TMP16F/TMPXF TRASH PUMP • OPERATION & PARTS MANUAL — REV. #1 (08/29/11)
STOPPING THE ENGINE
Normal Shutdown
1. Move the engine speed lever to the low speed and
run the engine for about three minutes with no load.
2. After the engine cools, move the engine speed lever
to the STOP position (Figure 10).
Figure 10. Engine Speed Lever Control (STOP)
3. Slowly pull the starter grip (Figure 8) until strong
resistance is felt and leave it in this position. This
prevents rust from forming while the engine is not in
use.
Emergency Shutdown
1. To stop engine immediately, quickly place the engine
speed lever to the STOP position.
CAUTION
When stopping the engine, reduce the load slowly.
Do not stop engine suddenly since it may cause the
temperature to rise abnormally.
OPERATION