Filter
Top Products
9
6.0TACHometer Mode
6.1 TACHometer Setup
1. Turn
Power
ON
2. Enter
Setup
Mode
3. Enter
selection
of Mode
4. Select
TACH
Mode
5. Save and
advance
6. Enter
selection
of Units
OR Repeat until TACH
displayed
Last Mode selected is
displayed
1a. To toggle Lock
On/Off
RPS, RPM or RPH
Last Units selected are
displayed
Locked On
Press and Hold
14
Unit will remember these settings (including lock on/off) even if turned off
and back on.
DONE,
USE CONTACT TIP or
[wheel selected],
then Units selected
Min Speed
Max Speed
OR
Press and hold Lock on
11. Save and
advance
12. Exit Setup –
Ready to
measure
Measure
Recall Max
Recall Min
If unit Locked
on:
Power Off
7.2 RATE Operation
Resets Max/Min
Automatic after 90 seconds
if unit not Locked on
OR