Filter
Top Products
MANUAL TRANSMISSION (E -W) -
Transmission
22A-3-4
PWEE9508
E
May 1995Mitsubishi Motors Corporation
A
F
"
LOCATING PIN REMOVAL
Unscrew and remove th e locating pin.
NOTE
Do not lose the adjusting ring (if fitted).
A
G
"
COVER PLATE/POPPET SPRING/POPPET BALL
REMOVAL
Remove the cover plate and withdraw the poppet spring and
ball.
NOTE
Do not lose the poppet spring and ball.
A
H
"
TRANSMISSION CASE/POPPET BALL/POPPET
SPRING REMOVAL
(1) Remove the retaining bolts.
(2) Tap lightly to separate the transmission case and clutch
housing.
(3) Remove the transmission case; note the shim on the
output shaft.
NOTE
When removing the transmission case, hold the poppet
springs and balls of both selector shafts in position with
two hex nut drivers.
A
I
"
MAGNET/5TH GEAR SHIFT RAIL ASSEMBLY
REMOVAL
(1) Remove the magnet from the clutch housing.
(2) Remove the shift rail assembly 9 from the transmission
case.
NOTE
Catch the poppet spring and ball and put them to one
side.
RevisedPWEE9508-BMitsubishi Motors Corporation
May 1996
E
RevisedPWEE9508-BMitsubishi Motors Corporation
May 1996
E
<F5MR1, F5MR2>
<F5MR3>
RMT0004
9