Filter
Top Products
7. Remove Adapter from SCUBA tank and SPARE AIR.
8. Replace black knurled Cap on Check Valve.
NOTE: If air is escaping from the adapter during filling,
close tank valve, wait for air to stop and retighten
knurled ring by turning to the right.
NOTE: If SCUBA tank WAS NOT FULL at beginning of
refill procedure, then the pressure indicator will not
show full and your SPARE AIR will not be filled to its
recommended full capacity, diminishing available air
volume.
WARNING: If the SPARE AIR check valve or adapter
threads are damaged or worn these parts will require
replacement. Continued use may cause injury.
If you have any questions concerning this product,
please call:
Submersible Systems, Inc. Customer Service at
800-648-3483 or 714-842-6566
8 am-5pm PST, Monday-Friday,
or log on to our website at
www.spareair.com
13