Filter
Top Products
10
• If the SPARE AIR Nitrox is used with equipment or connected to air
supply systems which are not rated for Oxygen Service, it will be
considered contaminated and will require cleaning for Oxygen
Service prior to use again with Nitrox.
• Equipment users must be trained and certified in the specific use of
Nitrox by dive industry training agencies.
• Only a halocarbon based lubricant such as Christo-Lube MCG 111
should be used on SPARE AIR Nitrox.
HOW TO CARE FOR YOUR SPARE AIR
Providing the best possible preventative maintenance and
following routine pre- and post-dive steps diligently will help to
ensure the maximum life of your SPARE AIR system. SPARE AIR
should be serviced ANNUALLY by an Authorized SPARE AIR
Dealer or by Submersible Systems, Inc.
If you notice damage, wear or suspect any leaking or missing
parts, have SPARE AIR examined by an Authorized SPARE AIR
Dealer immediately.
WARNING: DO NOT attempt to repair SPARE AIR yourself.
Unauthorized repairs or tampering are hazardous and WILL
VOID your warranty.
The SPARE AIR cylinder has a DOT 3AL3000 rating and will require
HYDROSTATIC TESTING EVERY FIVE (5) YEARS and a VISUAL
INSPECTION ANNUALLY. Keep the Threads on both the Check
Valve and Refill Adapter clean and lubricated. Use a high-quality,
non-toxic, food grade spray silicone for best results.
WARNING: NEVER use a hydrocarbon based oil (i.e.
household oil or motor oil).