Filter
Top Products
99-8218
KIT ASSEMBLY
4
B
C
A
1
Mount the ISO Brackets to the
radio with the screws supplied
with the radio. (
Figure A)
2
Slide the radio into the radio open-
ing until the side clips engage.
(
Figure B)
4
Snap the pocket into the radio
housing. (
Figure B)
NOTE: Refer also to the instructions
included with the aftermarket radio.
Continue to Final Assembly.
5
Align the small legs on the bottom
of the radio housing with the slots in
the top of the climate control. Then
slide the climate control sideways to
engage together.
(
Figure C)
6
Attach the radio housing brackets to
the radio housing using the included
Phillips screws. (
Figure D)
D
7
Secure the radio housing brackets to
the climate control using the factory
hardware.
(
Figure D)
8
Attach the (2) clips removed in step
11 in dash disassembly to the radio
housing brackets using the supplied
small Phillips screws.(
Figure D)
ISO RADIO PROVISION WITH POCKET
3
Snap the Trim plate into the Radio
Housing. (
Figure B)