Filter
Top Products
3
99-8218
KIT ASSEMBLY
DIN RADIO PROVISION WITH POCKET
B
C
A
1
Slide the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(
Figure A)
2
Slide the after-market radio into the
cage until it snaps into place.
(
Figure B)
3
Snap the pocket into the radio
housing. (
Figure B)
NOTE: Refer also to the instructions
included with the aftermarket radio.
Continue to Final Assembly.
4
Align the small legs on the bottom
of the radio housing with the slots in
the top of the climate control. Then
slide the c
limate control sideways to
engage together. (
Figure C)
5
Attach the radio housing brackets to
the radio housing using the included
Phillips screws. (
Figure D)
D
6
Secure the radio housing brackets to
the climate control using the factory
hardware.
(
Figure D)
7
Attach the (2) clips removed in step
11 in dash disassembly to the radio
housing brackets using the supplied
small Phillips screws.(
Figure D)