Filter
Top Products
Place one of the ISO spacer brackets
and the left factory mounting bracket
(removed from radio during disas-
sembly) on the left side of the radio.
The spacer bracket should be
between the radio and the factory
bracket. Align the pins on the trim-
plate with the holes on the factory
bracket and mount the factory
bracket to the radio using screws
supplied with the radio.
(Figure B)
3
5
99-7402
KIT ASSEMBLY
Continue to final assembly.
Cut and remove center divider from
double DIN trim-plate.
(Figure A)
1
Place the double DIN trim-plate on
the front of the radio.
(Figure B)
2
C
A
B
DOUBLE DIN RADIO
5
Attach the radio bracket assembly to
the radio trim panel using the
factory screws removed during
disassembly.
(Figure C)
4
Place one of the ISO spacer brackets
and the right factory mounting
bracket (Removed from radio during
disassembly) on the right side of the
radio. (The spacer bracket should be
between the radio and the factory
bracket.) Align the pins on the trim-
plate with the holes on the factory
bracket and mount the factory
bracket to the radio using screws
supplied with the radio.
(Figure B)