Filter
Top Products
Snap the ISO trim-plate onto the front
of the assembled radio and housing.
(Figure B)
3
4
NOTE: To remove the radio unsnap and
remove the ISO trim-plate. Using a flat
blade screwdriver disengage ISO
brackets from the radio housing and
slide radio out of radio housing.
99-7402
KIT ASSEMBLY
Continue to final assembly.
Align the holes in the ISO brackets with
the holes in the radio. Mount the
brackets to the radio using screws
supplied with the radio.
(Figure A)
1
Slide the radio bracket assembly into
the radio housing until it snaps into
place.
(Figure B)
2
C
A
B
ISO MOUNT RADIO WITH POCKET
4
Attach the radio / housing assembly
to the radio trim panel using the
factory screws removed during
disassembly.
(Figure C)