Filter
Top Products
X
Turn bulb holder ; counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it
clockwise until it engages.
Standing lamps/parking lamps
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : into the lamp and turn
it clockwise.
Turn signal lamps/side marker lamps
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : (WY 5 W) / ; (3457
A) counter-clockwise and pull it out.
X
Remove the bulb from bulb
holder : / ;.
X
Insert the new bulb into bulb
holder : / ;.
X
Insert bulb holder : / ; into the lamp
and turn it clockwise.
Changing the rear bulbs
Opening/closing the side trim
You must open the side trim panel in the
cargo compartment before you can change
the bulbs in the tail lamps.
Left-hand side trim panel
X
To open: turn release knobs : 90° in the
direction of the arrow and remove side trim
panel ;.
X
Insert a suitable object, e.g. a coin, into the
slots of release knobs =.
114
Changing bulbs
Lights and windshield wipers
BA 164.1 USA, CA Edition B 2011; 1; 2, en-US
d2mskot Version: 3.0.3.5
2010-04-21T17:25:06+02:00 - Seite 114