Mercedes-Benz 2010 CLS63 AMG Automobile User Manual


 
Use buttons & or * to select the
following functions in the AMG menu:
R
Vehicle supply voltage (Y page 114)
R
RACETIMER (Y page 114)
R
Overall analysis (Y page 115)
R
Lap analysis (Y page 115)
Vehicle supply voltage
X
Press button V or U repeatedly until
the AMG menu appears in the
multifunction display.
X
Press button & repeatedly until the
vehicle supply voltage appears in the
multifunction display.
:
Gear indicator
;
Vehicle supply voltage indicator
RACETIMER
G
Warning!
The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on public roads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.
The RACETIMER allows you to time and save
driving stretches.
X
Press button V or U repeatedly until
the AMG menu appears in the
multifunction display.
X
Press button & repeatedly until the
RACETIMER appears in the multifunction
display.
:
Gear indicator
;
RACETIMER
=
Lap number
You can start the RACETIMER when the
engine is running or the starter switch is in
position 2 (Y page 76).
While the RACETIMER is being displayed, you
cannot adjust the audio volume using buttons
W or X.
X
Starting: Press button W.
X
Displaying intermediate time: Press
button X while the timer is running.
The intermediate time is shown for
5 seconds.
X
Stopping: Press button W.
When you stop the vehicle and turn the
SmartKey to position 1 (Y page 76) or, in
vehicles with KEYLESS-GO, turn off the
engine and do not open the driver’s door, the
RACETIMER stops timing. Timing is resumed
when you press button W after switching
the ignition back on or restarting the engine.
Saving lap time and starting a new lap
You can save up to nine laps.
X
Press button X while the timer is
running.
The intermediate time will be shown for
5 seconds.
X
Press button X within 5 seconds.
The intermediate time shown will be saved
as a lap time.
The RACETIMER begins timing the new lap.
The new lap begins to be timed as soon as
the intermediate time is called up.
114
Control system
Controls in detail
219_AKB; 4; 54, en-US
d2ureepe, Version: 2.11.8.1
2009-05-11T16:21:02+02:00 - Seite 114