Filter
Top Products
212
Controls in detail
Climate control
Adjusting air distribution
Press air distribution button 5, 9, or a
(
୴ page 208) to adjust the air distribution.
The following symbols are found on the
controls:
̈ Press the desired air distribution
button 5, 9, or a (
୴ page 208).
The indicator lamp on button U
goes out.
Adjusting air volume
Five blower speeds are available.
̈ Press button to decrease or
button Q to increase air volume
(
୴ page 208) to the desired level.
The indicator lamp on button U
(
୴ page 208) goes out. The automatic
operation of air volume switches off.
The selected blower speed is shown in
the air volume display b
(
୴ page 208).
Adjusting air volume for the center and
side air vents
Opening the center air vents
̈ Turn thumbwheels 4 and 7
(
୴ page 206) to the right.
The corresponding center air vents on
the left and right are open.
Closing the center air vents
̈ Turn thumbwheels 4 and 7
(
୴ page 206) to the left.
The corresponding center air vents on
the left and right are closed.
Opening the side air vents
̈ Turn thumbwheels 3 and 8
(
୴ page 206) to the right.
The corresponding side air vents on the
left and right are open.
Closing the side air vents
̈ Turn thumbwheels 3 and 8
(
୴ page 206) to the left.
The corresponding side air vents on the
left and right are closed.
Symbol Function
a Directs air through the center
and side air vents
Z Directs air to the windshield
and side air vents
Y Directs air to the footwells and
side air vents