Filter
Top Products
179
Controls in detail
Control system
Distance warning function*
In vehicles equipped with Distronic*, you
can determine whether the distance warn-
ing function is to be enabled or disabled.
With this function set to
On
, the system will
alert you when recognizing a stationary ob-
stacle or a slower vehicle moving in your
vehicle’s path and the danger of a collision
exists, even when the Distronic* is
switched off.
̈ Press button è or ÿ repeatedly
until the
Vehicle configuration
menu
appears in the multifunction display.
̈ Press button j or k repeatedly
until the message
Distance warning
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to switch
the distance warning function
On
or
Off
.
1 Symbol for activated distance warning
function
If the distance warning function is
activated you will see the : symbol in
the Standard display. When the distance
warning function is deactivated the
: symbol will not appear.
DSR (Downhill Speed Regulation)
programmed default speed
In the
Downhill Speed Regulation
menu,
you can program the default speed the
DSR is set to when it is activated.
You can program the default speed be-
tween 4-10 mph (Canada: 6-18 km/h).
The set value is increased in 1 mph
(Canada: 2 km/h) increments.
̈ Press button è or ÿ repeatedly
until the
Vehicle configuration
menu
appears in the multifunction display.
̈ Press button j or k repeatedly
until the message
DSR Speed
appears
in the multifunction display.
The selection marker is on the current
setting.
୴୴