Filter
Top Products
140
Controls in detail
Lighting
Combination switch
1 High beam
2 High beam flasher
High beam
̈ Canada only: Turn the exterior lamp
switch to position B (
୴ page 136).
or
̈ USA only: Turn the exterior lamp switch
to position B or U
(
୴ page 136).
̈ Push the combination switch in
direction of arrow 1 to switch on the
high beam.
The high beam headlamp indicator
lamp A in the instrument cluster
comes on (
୴ page 26).
̈ Pull the combination switch in direction
of arrow 2 to its original position to
switch off the high beam.
The high beam headlamp indicator
lamp A in the instrument cluster
goes out.
High beam flasher
̈ Pull the combination switch briefly in
direction of arrow 2.
Corner-illuminating front fog lamps*
The corner-illuminating front fog lamps im-
prove illumination of the area in the direc-
tion into which you are turning.
The corner-illuminating front fog lamps will
operate with the engine running and with
ț the exterior lamp switch in
position B (
୴ page 136)
or
ț the exterior lamp switch in
position U (
୴ page 136)
or
ț the daytime running lamp mode
activated (
୴ page 138)
i
The corner-illuminating front fog lamps will
only come on in low ambient lighting conditions.
If you are driving faster than 25 mph (40 km/h)
or have the front fog lamps switched on, the
corner-illuminating function is not available.