Filter
Top Products
Seats
90
3
Seat backrest center
4
Seat backrest side bolster
X
Switch on the ignition.
X
Seat cushion depth: Adjust the seat
cushion depth to the length of your upper
leg using switch 1.
X
Seat backrest contour: Adjust the
contour of the seat backrest to the desired
position using switches 2 and 3.
X
Seat backrest side bolsters: Adjust the
side bolsters so that they provide good
lateral support using switch 4.
i
If, after a period of time, the seat no longer
provides the desired contour, then repeat
the adjustment procedure.
Seat ventilation
1
Seat ventilation switch
The blue indicator lamps in the switch come
on to show which ventilation level you have
selected.
i
The seat ventilation for the driver’s seat
can be activated using summer opening
feature (Y page 105).
X
Switch on the ignition.
X
Switching on: Press switch 1.
Three blue indicator lamps in the switch
come on.
X
Press switch 1 repeatedly until the
desired ventilation level is set.
X
Switching off: Press switch 1 repeatedly
until all indicator lamps go out.
If one or more of the indicator lamps in the
seat ventilation switch 1 are flashing, there
is insufficient voltage available since too
many electrical consumers are turned on. The
seat ventilation switches off automatically.
The seat ventilation will switch back on again
automatically as soon as sufficient voltage is
available.
Seat heating
1
Seat heating switch
The red indicator lamps in switch 1 come on
to show which heating level you have
selected.
The seat heating switches from level 3 (high)
to level 2 after approximately 5 minutes.
Controls in detail