Filter
Top Products
Control system
135
Selecting display (speed or outside
temperature) for status line
X
Move the selection marker with button
æ or ç to the Instr. Cluster
submenu.
X
Press button j or k repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
status line to Speed or Outside Temp..
You will see the status line display when
you have called up a different display from
the standard display.
Selecting display (speed or outside
temperature) for standard display
X
Move the selection marker with button
æ or ç to the Instr. Cluster
submenu.
X
Press button j or k repeatedly until
the message Basic Display appears in
the multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
display shown in the standard display.
The other display now appears in the
Standard display menu (Y page 126).
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
R
Setting the time (Y page 135)
R
Setting the date (Y page 136)
The Time/Date submenu is not shown in
vehicles with COMAND system.
Setting the time
This function is only available in vehicles with
audio system.
Vehicles with COMAND system:
For information on setting the time in the
COMAND system, refer to the separate
COMAND system operating instructions.
X
Move the selection marker with button
æ or ç to the Time/Date submenu.
X
Press button j or k repeatedly until
the message Time - Hours Press R To
Confirm or Time - Minute(s) Press R
To Confirm appears in the multifunction
display.
The selection marker is on the current
setting.
Controls in detail
Z