Filter
Top Products
137
Controls in detail
Control system
̈ Press the reset button J on the
instrument cluster (
୴ page 26) for
approximately 3 seconds.
The request to press the reset
button J once more to confirm
appears in the multifunction display.
̈ Press the reset button J once more.
The functions of all submenus will be
reset to the factory settings.
The message
Reset to factory
settings? Push reset button to
confirm
appears in the multifunction
display.
Submenus in the Settings menu
̈ Press button è or ÿ repeatedly
until the
Settings
menu appears in the
multifunction display.
̈ Press button j.
In the multifunction display you see the
collection of the submenus. There are
more submenus than can be simulta-
neously displayed.
̈ Press button ç.
The selection marker moves to the next
submenu.
̈ Scroll up with button æ, and scroll
down with button ç.
̈ With the selection marker on the
desired submenu, use the j button
to access the individual functions
within that submenu.
̈ Once within the submenu, use the
j button to move to the next
function or the k button to move
to the previous function within that
submenu.
̈ Use buttons æ or ç to change
the settings of the respective function.
i
Your individual settings will not be reset un-
less you confirm the action by pressing the reset
button J again.
After 5 seconds the
Settings
menu reappears
in the multifunction display.