Filter
Top Products
106
Controls in detail
Seats
Red indicator lamps 2 on AIRSCARF
switch 1 show which heating level you
have selected:
̈ Switch on the ignition (୴ page 37).
Switching on
̈ Press the AIRSCARF switch 1 for the
desired side.
All three indicator lamps 2 on
respective AIRSCARF switch 1 come
on. After a preheating time of approxi-
mately 7 seconds, the blower starts.
̈ Press AIRSCARF switch 1 repeatedly
until the desired AIRSCARF heating
level for the corresponding seat is
reached.
Switching off
̈ Press AIRSCARF switch 1 repeatedly
until all indicator lamps 2 on
AIRSCARF switch 1 go out.
Level
3 Three indicator lamps on
(highest level).
2 Two indicator lamps on.
1 One indicator lamp on
(lowest level).
off No indicator lamp on.
i
After switching off the AIRSCARF neck-level
heating, the AIRSCARF fan continues to operate
for approximately 10 seconds to cool down the
heater elements.
i
If one or more indicator lamps 2 on
AIRSCARF switch 1 are flashing, there is insuf-
ficient voltage available since too many electri-
cal consumers are turned on. The AIRSCARF
neck-level heating switches off automatically.
The AIRSCARF neck-level heating will switch
back on again automatically as soon as sufficient
voltage is available.