433
Practical hints
Replacing bulbs
̈ Pull tab 2 in the direction of the
arrow.
̈ Remove the bulb carrier.
1 Brake lamp
2 Backup lamp
3 Rear fog lamp (driver’s side)/tail lamp
4 Tail lamp, parking and standing lamp,
side marker lamp
5 Turn signal lamp
̈ Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
̈ Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
̈ Reinstall the bulb carrier.
Let tab 2 (
୴ page 432) engage.
̈ Connect the electrical connector 1
(
୴ page 432) until it engage.
̈ Reinstall trim panel.
License plate lamp
1 Screws
2 License plate lamp
̈ Loosen both screws 1.
̈ Remove the license plate lamp 2.
̈ Replace the tubular lamp.
̈ Reinstall the license plate lamp 2.
̈ Retighten the screws 1.