Filter
Top Products
182
Controls in detail
Automatic transmission
The following instructions describe opera-
tion of the steering wheel gearshift control
when driving in the automatic program
mode C or S.
For instructions on operating the steering
wheel gearshift control and gear selector
lever in the manual program mode M, see
“Manual shift program S 55 AMG and
S65AMG” (
୴ page 183).
Downshifting
̈ Briefly press button 1 on the left side
of the steering wheel.
The transmission will shift to the next
lower gear as permitted by the shift
program. This action simultaneously limits
the gear range of the transmission
(
୴ page 178) when you are driving in the
automatic program mode (C or S).
Upshifting
̈ Briefly press button 2 on the right
side of the steering wheel.
The transmission will shift to the next
higher gear as permitted by the shift
program. This action simultaneously
extends the gear range of the transmission
when you are driving in the automatic
program mode (C or S).
Canceling gear range limit
̈ Press and hold button 2 on the right
side of the steering wheel until
D
reappears in the tachometer display.
The transmission will shift from the current
gear range directly to gear range D.
Shifting into optimal gear range
̈ Press and hold button 1 on the left
side of the steering wheel.
The transmission will automatically select
the gear range suited for optimal
acceleration and deceleration. This will
involve shifting down one or more gears.
i
You cannot shift with the steering
wheel gearshift buttons when the gear
selector lever is in position P, N or R.
The last selected program
mode (C or S) is switched on when the
engine is restarted in the automatic
program mode.
Warning! G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.