Filter
Top Products
171
Controls in detail
Control system
̈ Move the selection marker to the
CONVENIENCE
submenu using the æ
or ç button.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
MIRROR SETTING WHEN
PARKING
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
ON
or
OFF
.
Depending on vehicle production date, this
feature has been deactivated at the facto-
ry. If deactivated, the screen shown above
does not appear in the multifunction dis-
play. To have this feature activated and ap-
pear in the multifunction display, contact
an authorized Mercedes-Benz Center.
Without this screen appearing and set to
ON, the rear view mirror parking position
feature (
୴ page 187) is not available.
Adjusting drive-dynamic seats*
Use this function to adjust the settings for
the drive-dynamic seat (
୴ page 124).
̈ Move the selection marker with
the æ or ç button to
the
CONVENIENCE
submenu.
̈ To adjust the drive-dynamic seat press
button j or k repeatedly until
you see this message in the multifunc-
tion display:
The selection marker is on the current
setting.
Message for the driver’s seat
Message for the front passenger seat:
DRIV. DYN. SEAT ADJ.
FRONT PASSENGER
LEVEL 1
LEVEL 2
̈ Press button æ or ç to select
the desired setting.
The following settings are available:
LEVEL 1
(Sporty) Strong lateral sup-
port and fast air pressure
build-up in the air chambers
of the backrest side bolsters
LEVEL 2
(Comfort) Less lateral sup-
port and slow air pressure
build-up in the air chambers
of the backrest side bolsters