Filter
Top Products
292
Controls in detail
Loading
Removing partition net
̈ Release tensioning of the strap by pull-
ing tensioner 1 down.
̈ Disengage hook 2 from tie-down
ring 3.
̈ Remove mounting hooks 2 from
holder 1, see “Engaging partition net”
(
୴ page 291).
̈ Roll up the partition net.
̈ Press the red button on the partition
net bar.
̈ Fold partition net bar.
̈ Roll up the partition net.
̈ Close zipper on partition net package.
Tightening partition net in third row
1 Hook
2 Tie-down ring
̈ Insert hook 1 in tie-down ring 2.
3 Partition net ring
4 Tensioner hook
5 Tensioner
̈ Pull tensioner 5 up in direction of ar-
row towards partition net ring 3.
̈ Insert tensioner hook 4 in partition
net ring 3 located at lower edge of the
partition net.
̈ Release tensioner 1.