Filter
Top Products
192
Controls in detail
Control system
Trip computer menu
Use the trip computer menu to call up
statistical data on your vehicle.
The following information is available:
Fuel consumption statistics after start
̈ Press button ÿ or è repeatedly
until the message
After start
appears
in the multifunction display.
1 Distance driven since start
2 Time elapsed since start
3 Average speed since start
4 Average fuel consumption since start
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until the message
After start
appears
in the multifunction display.
̈ Press and hold the reset button in the
instrument cluster (
୴ page 158) until
the value is reset to
0
.
Function Page
Fuel consumption statistics after
start
192
Fuel consumption statistics
since last reset
193
Calling up range (distance to
empty)
193
i
When you enter the trip computer
menu, you will always see the fuel
consumption statistics after start first.
i
All statistics stored since the last
engine start will be reset approximately
4 hours after the SmartKey in the start-
er switch is turned to position 0 or re-
moved from the starter switch.
Resetting will not occur if you turn the
SmartKey back to position 1 or 2
within this time period.