Filter
Top Products
89
Safety and Security
Occupant safety
Blocking of rear door window operation
1 Override switch
2 Indicator lamp
̈ Press override switch 1.
Indicator lamp 2 comes on. The rear
door windows can no longer be operat-
ed using the switches located in the
rear doors.
!
Make sure the seat belt for the center
seat can operate freely with a child
seat installed.
i
Non-LATCH type child seats may also
be used and can be installed using the
vehicle’s seat belt system (
୴ page 78).
Install child seat according to the man-
ufacturer’s instructions.
Warning! G
Children too big for a toddler restraint must
ride in seats using regular seat belts. Posi-
tion shoulder belt across chest and shoul-
der, not face or neck. A booster seat may be
necessary to achieve proper belt positioning
for children over 41 lbs until they reach a
height where a lap/shoulder belt fits proper-
ly without a booster.
Install child seat according to manufactur-
er’s instructions.
The child seat must be firmly attached in the
right and left side anchors 2.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to the child.
Damaged or impact damaged child seats or
child seat mounting fittings must be re-
placed.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
child restraint system.
!
Operation of the rear door windows
with the switches located on the door
control panel of the driver’s door is still
possible.