Filter
Top Products
78
Safety and Security
Occupant safety
̈ Reinstall cover 1 after removing the
tether strap.
Child seat anchors – LATCH-type
This vehicle is equipped with two LATCH-
(L
ower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a LATCH-type
child seat with the matching mounting
fittings.
To fold anchors out
The foldable LATCH-type anchors are
located between the seat cushion and the
backrest.
1 Anchors
2 Release button
̈ Grip inner side of anchors 1 and fold
forward until they audibly lock in place.
̈ Install child seat according to the
manufacturer’s instructions.
i
For safety, make sure the hook 2 has
attached to the ring 3 beyond the
safety catch, as illustrated.
i
If a child seat is not installed, the
LATCH-type anchors can be folded
back between the seat cushion and the
backrest (
୴ page 79).
i
The child seat must be firmly attached
in the right and left side anchors 1.
With a child seat installed in the left
rear seat, the seat belt for the center
seat occupied by a passenger must op-
erate freely. Guide seat belt between
its seat cushion mount and backrest
mount along outside of right side child
seat anchor.
୴୴