Filter
Top Products
147
Controls in detail
Control system
Selecting time display mode
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Clock display
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to set
the
12h
or
24h
time display mode.
Selecting automatic time change
(Daylight Saving Time (DST)
summer/Standard time winter)
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Change-over
Summer / Winter time
appears in the
multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select if
the changeover between summer and
winter time should be automatic or
manual.
Setting the date (month)
This function can only be seen with audio
system.
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Date Set MM
appears
in the multifunction display.
i
Vehicles with COMAND*:
For information on setting the date,
refer to the separate COMAND
operating instructions.
୴୴