Filter
Top Products
228
Controls in detail
Driving systems
The following vehicle level settings can be
selected when the vehicle is stationary and
the engine is running:
The button is located in the lower section
of the center console.
1 Vehicle level control button
2 Indicator lamp
̈ Briefly press button 1 to change from
“Normal” level to “Raised” level. When
vehicle is at “Raised” level, pressing
the switch will return the vehicle to
“Normal” level.
Vehicle level when
stationary
Use for Ride height increase
over normal
Automatic lowering Indicator lamp (୴ page 228)
Normal Normal operation None Max. approx. 0.6 in
(15 mm)
Lamp off
Raised Driving with snow
chains or very rough
road surface conditions
Approximately 0.8 in
(20 mm)
Max. approx. 1.4 in
(35 mm)
Lamp on
i
At a speed of approximately above
75 mph (120 km/h) or if the speed
amounts to between 50 mph
(80 km/h) and 75 mph (120 km/h)
for approximately five minutes, the set-
ting “Raised” is canceled. The message
Level selec. canceled
appears in the
multifunction display.
If you do not drive in this speed range,
the “Raised” level remains stored even
if the SmartKey is removed from the
starter switch.