Filter
Top Products
152
Controls in detail
Control system
Setting SmartKey-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel, the mirrors and other settings of
the control system should be stored sepa-
rately for each SmartKey (
୴ page 88).
̈ Move the selection marker with
the æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Key-dependent
.
The selection marker is on the current
setting.
̈ Press æ or ç to set Smart-
Key-dependency to
on
or
off
.
Setting parking position for exterior rear
view mirror
Use the
Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear R is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
୴ page 168).
̈ Move the selection marker to the
Convenience
submenu using the æ
or ç button.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Mirror adjustment parking aid
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
on
or
off
.
Dynamic seat* submenu
Access the
Dynamic Seat
submenu via the
Settings
menu. Use the
Dynamic Seat
submenu to change the settings for the dy-
namic seats. The following functions are
available:
Function Page
Adjust driver seat 153
Adjust passenger seat 141