Filter
Top Products
52
Getting started
Parking and locking
̈ After exiting the vehicle press the lock
button
‹ on the remote control
(
୴ page 30).
The locking knobs on the doors move
down. The turn signal indicators light
up briefly.
More information can be found in the
“Controls in detail” section (
୴ page 84).
Turning off engine with KEYLESS-GO*
̈ Place the gear selector lever in P.
̈ Press the KEYLESS-GO start/stop but-
ton until the engine shuts off.
With the driver's door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as key re-
moved from starter switch
(
୴ page 31).
̈ Press the seat belt release button
(
୴ page 42).
!
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.
Warning! G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure that there
is no possibility of someone getting caught
in a door during closing.
Warning! G
When leaving the vehicle always remove the
key from the starter switch and lock your ve-
hicle. Do not leave children unattended in
the vehicle, or with access to an unlocked
vehicle. Unsupervised use of vehicle may
cause an accident and/or serious personal
injury.
!
If you hear a warning signal you have ei-
ther
ț forgotten to turn off the lights, or
ț not put the gear selector lever in P
before opening the driver’s door.
Turn off the lights or place the gear se-
lector lever in P.