Filter
Top Products
188
Controls in detail
Power windows
If you pull and hold the switch up when
closing the window, and upward move-
ment of the window is blocked by some ob-
struction including but not limited to arms,
hands, fingers etc., the automatic reversal
will not operate.
Fully opening windows
̈ Press switch past resistance point and
release.
The window opens completely.
Fully closing windows
̈ Pull switch past resistance point and
release.
The window closes completely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping windows
̈ Press or pull respective switch again.
Opening and closing the windows with
the SmartKey
The sliding/pop-up roof will also be
opened or closed when you operate the
power windows with the key.
Warning! G
Driver's door only:
If within five seconds you again pull the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
i
You can also open or close the win-
dows using the:
ț SmartKey, see below
ț button , in the control panel of
the automatic climate control
(
୴ page 155).
ț button e in the control panel of
the automatic climate control
(
୴ page 155).
Warning! G
Never operate the windows or slid-
ing/pop-up roof if there is the possibility of
anyone being harmed by the opening or
closing procedure.
In case the procedure causes potential dan-
ger, the procedure can be immediately halt-
ed by releasing the remote control button.
To reverse direction of movement press
Œ
for opening or ‹ for closing.