Filter
Top Products
104
Controls in detail
Memory function
You can store a parking position for the
passenger exterior rear view mirror for
each SmartKey or SmartKey with
KEYLESS-GO* using the memory switch.
1 Memory button
2 Adjustment button
3 Passenger side exterior rear view mir-
ror
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 3 on the dashboard to the
left of the steering wheel.
The passenger side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the curb.
̈ Press memory button “M” 1 on the
door.
̈ Within three seconds, press bottom of
adjustment button 2 above the exterior
lamp switch.
The parking position is stored if the
mirror does not move.
For information about activating the park-
ing position, see “Parking position”
(
୴ page 150)
i
If the mirror does move, repeat the
above steps. You can move the mirror
again after the setting is stored.