Filter
Top Products
3-6
Knowing Your Mazda
Doors and Locks
Form No. 8R09-EA-02G
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and gently pry open the transmitter.
2. Press the portion of the battery
indicated by A and remove the battery.
3. Install a new battery (CR2025 or the
equivalent) into the front portion of the
holder with the positive pole ( )
facing up. Press on the B portion of the
battery to set the battery.
4. Align the front and back covers and
snap the transmitter shut.
Slot
Back cover
A
Do not press any buttons when
replacing the battery. The electronic
code could be altered and cause the
keyless entry system to malfunction.
If the keyless entry system fails to
operate, contact an Authorized Mazda
Dealer.
B
Back cover
Front
cover
Front o
f
holder
CAUTION
J07R_8R09_EA_02G.book Page 6 Monday, July 1, 2002 11:30 AM