Filter
Top Products
Black plate (420,1)
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of removal.
qReplacing Interior Light Bulbs
Overhead light/Map light (Front),
Overhead light (Rear), Vanity mirror
lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead light/Map light (Front)
Overhead light (Rear)
Edge
Vanity mirror lights
3. Install the new bulb in the reverse order
of removal.
Trunk light (4 Door )
1. Press both sides of the lens cap to
remove it.
8-50
Maintenance andCare
Owner Maintenance
Mazda3_8AR3-EA-09E_Edition2 Page420
Monday, June 1 2009 1:19 PM
Form No.8AR3-EA-09E