Filter
Top Products
Black plate (139,1)
qHow to Arm the System
1. Remove the key from the ignition
switch.
(With advanced key)
Press the push button start to off
position, if the auxiliary key is inserted
in the key slot, remove it.
2. Make sure the hood and the trunk lid
are closed. Close and lock all doors and
the liftgate from the outside using the
key. If you have the keyless entry
system, press the lock button on the
transmitter.
The hazard warning lights will flash
once.
(With advanced key)
Press a request switch on the doors or
the lock button on the transmitter.
(Without advanced key)
The following method will also arm the
theft-deterrent system:
Close the hood and the liftgate/trunk
lid . Press the area on the door-lock
switch marked “
” once. Close all
doors.
The security indicator light in the
instrument panel flashes twice per
second for 20 seconds.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the liftgate/
trunk lid and the hood closed.
NOTE
Locking the doors with the inside door-lock
knob will not arm the system.
3. After 20 seconds, the system is fully
armed.
NOTE
l
Auto re-lock function
After unlocking with the transmitter or the
request switch, all doors and the liftgate
will automatically lock if any of the
following operations are not performed
within about 30 seconds.
l
A door or the liftgate/trunk lid is opened.
l
The auxiliary key inserted into the key
slot (with advanced key).
l
The key is inserted in the ignition switch.
l
The push button start is in any position
except off (with advanced key).
l
The ignition is switched ON.
l
The system will disarm if one of the
following operations takes place within 20
seconds after closing the trunk lid and
locking all the doors and the liftgate:
l
Pressing the unlock button on the
transmitter.
l
Any door or the liftgate/trunk lid is
opened.
l
Unlocking a door with the inside door-
lock knob.
l
Unlocking a door with the door lock
switch.
l
Unlocking the driver's door with the key.
l
The hood is opened.
l
The key is inserted in the ignition switch.
l
The auxiliary key inserted into the key
slot (With advanced key).
l
The push button start is pressed or a
door is unlocked using a request switch
on the front doors (With advanced key).
l
The ignition is switched on.
To rearm the system, do the arming
procedure again.
Knowing Your Mazda
Security System
3-63
Mazda3_8AR3-EA-09E_Edition2 Page139
Monday, June 1 2009 1:17 PM
Form No.8AR3-EA-09E