Filter
Top Products
Black plate (296,1)
19. Prompt: “Adding XXXXXX - - -
(Ex. “Stan's device”) (Device tag). Is
this correct?”
20. Say: [Beep] “Yes”
21. Prompt: “Pairing complete”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth Hands-Free again, or
by activating Bluetooth Hands-Free first
after switching the ignition from off
(LOCK) to ACC, the system reads out a
voice guidance, “XXXXXX - - - (Ex.
“Stan's device”) (Device tag) is
connected”.
NOTE
Device registration can also be done by
operating the audio unit or panel buttons on
the navigation unit. Refer to “Bluetooth Audio
Preparation” (page 6-64)(For audio unit) or
the separate manual “NAVIGATION
SYSTEM” (For navigation unit).
qMaking a Call Using a Telephone
Number
1. Activate Bluetooth Hands-Free (page
6-74).
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt: “Dialing XXXXXXXXXXX
(Ex. “555-1234”) (Telephone number)
is this correct?”
6. Say: [Beep] “Yes” or “No”.
7. When “Yes” is spoken, the procedure
proceeds to Step 8.
When “No” is spoken, the procedure
returns to Step 3.
8. Prompt: “Dialing”
qReceiving an Incoming Call
1. Prompt: “Incoming call, press the
pickup button to answer”.
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
qHanging Up a Call
Press the hang-up button during the call.
Beep will confirm that call is ended.
qVolume Adjustment
Turn the power/volume dial of the audio
unit or navigation system to adjust the
volume.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
Audio unit Navigation system
NOTE
l
The volume can also be adjusted using the
volume button on the steering wheel.
l
The music volume of the audio unit and the
navigation system cannot be adjusted while
Bluetooth Hands-Free is being used.
6-78
Interior Comfort
Bluetooth Hands-Free
Mazda6_8Z64-EA-08H_Edition1 Page296
Wednesday, June 25 2008 10:4 AM
Form No.8Z64-EA-08H