Filter
Top Products
Setting cruise control
The controls for using your cruise
control are located on the steering
wheel for your convenience.
1. Press the ON control and
release it.
2. Accelerate to the desired speed.
3. Press the SET + control and
release it.
4. Take your foot off the
accelerator pedal.
5. The indicator light
on the
instrument cluster will turn on.
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your cruise control will disengage.
Disengaging cruise control
To disengage the cruise control:
• Depress the brake pedal or
• Depress the clutch pedal (if equipped).
Disengaging the cruise control will not erase previous set speed.
Note: When you use the clutch pedal to disengage the cruise control,
the engine speed may briefly increase, this is normal.
2009 B-Series (mbs)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
61