Mazda 2009 B2300 Truck Automobile User Manual


 
Turning off cruise control
There are three ways to turn off the cruise control:
Depress the brake pedal or the clutch pedal (if equipped). This will
not erase your vehicle’s previously set speed.
Press the cruise control OFF
control.
Turn off the ignition.
Note: When you turn off the cruise
control or the ignition, your cruise
control set speed memory is erased.
Note: Fully depressing the clutch
pedal may cause a flare in engine RPM as the throttle is returned to idle.
This is normal.
OVERDRIVE CONTROL (IF EQUIPPED)
Activating overdrive
(Overdrive) is the normal drive position for the best fuel economy.
The overdrive function allows automatic upshifts and downshifts through
all available gears.
Deactivating overdrive
Press the Transmission Control
Switch (TCS) located on the end of
the gearshift lever. The O/D Off
indicator light will illuminate on the
instrument cluster. The transmission
will operate in all gears except overdrive.
To return to normal overdrive mode, press the Transmission Control
Switch again. The O/D Off indicator light will no longer be illuminated.
When you shut off and re-start your vehicle, the transmission will
automatically return to normal
(Overdrive) mode.
For additional information about the gearshift lever and the transmission
control switch operation refer to the Automatic transmission operation
section of the Driving chapter.
BED EXTENDER (IF EQUIPPED)
Your vehicle may be equipped with a bed extender designed to extend
the pickup box for larger loads.
O/D
ON/OFF
2009 B-Series (mbs)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
63