Filter
Top Products
Black plate (330,1)
CAUTION
Ø A wrong-sized wheel may
adversely affect:
Ø
Tire fit
Ø
Wheel and bearing life
Ø
Ground clearance
Ø
Snow-chain clearance
Ø
Speedometer calibration
Ø
Headlight aim
Ø
Bumper height
Ø
Tire Pressure Monitoring
System
Ø
Limited-Slip Differential System
Ø (With Tire Pressure Monitoring
System)
Ø
When replacing/repairing the
tires or wheels or both, have the
work done by an Authorized
Mazda Dealer, or the tire
pressure sensors may be
damaged.
Ø
The wheels equipped on your
Mazda are specially designed
for installation of the tire
pressure sensors. Do not use
non-genuine wheels, otherwise
it may not be possible to install
the tire pressure sensors.
NOTE
Be sure to install the tire pressure sensors
whenever tires or wheels are replaced. Refer to
Tires and Wheels on page 5-31.
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
8-38
Maintenance andCare
Owner Maintenance
CX-7_8X59-EA-07E_Edition3 Page330
Wednesday, July 25 2007 3:19 PM
Form No.8X59-EA-07E