Filter
Top Products
Fluid Mazda Part
Name
Application Capacity
Fuel tank N/A Regular cab
(Short wheel
base)
17 gallons
(64.4L)
SuperCab 19.5 gallons
(73.8L)
Transfer Case
Fluid
Mazda
MERCON ATF
4x4 Vehicles 1.25 quarts
(1.2L)
Front axle
lubricant
Mazda SAE
80W-90
Premium Rear
Axle Lubricant
4x4 Vehicles 3.6 pints (1.7L)
Rear axle
lubricant
5
Mazda SAE
80W-90
Premium Rear
Axle Lubricant
All 5.0-5.3 pints
(2.4-2.5L)
Windshield
washer fluid
Ultra-Clear
Windshield
Washer
Concentrate
All 2.75 quarts
(2.6L)
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCONV. Refer to the Service Maintenance
Section to determine the correct service interval.
2
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4
Add the coolant type originally equipped in your vehicle. DO NOT MIX
different colors or types of coolant. DO NOT USE Mazda Extended Life
Engine Coolant (orange in color). Refer to Adding engine coolant, in
this chapter.
REVIEW COPY
2005 Mazda B Series (mbs), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)
Maintenance and Specifications
243