Filter
Top Products
Installation 6
Check Connection and Final Adjustments
If the power indicator light on the vehicle power cable connector is on, power is being supplied to the
Magellan Maestro. If it is not on, check the cable connection to the vehicle power receptacle. If the
light is still not on, turn the vehicle’s ignition on.
Press the power button (located at the bottom right side of the Maestro) and hold down for a few
seconds. The Magellan Maestro will power on. Sit in a normal driving position and make any final
adjustments to the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel
mount to hold the Magellan Maestro firmly in place.
Press the power button again to turn the Magellan Maestro off and turn the ignition switch to the
vehicle to off. The Magellan Maestro is connected and ready for use.
Security
It is recommended that the Magellan Maestro is not left in plain view while unattended for reasons of
theft.
Please note that the Magellan Maestro is a receiver only and does not transmit GPS location signals.
The receiver nor the vehicle can be tracked using the Magellan Maestro.
Region
By default, the Magellan Maestro has the region setting for the lower 48 United States. When the
receiver is turned on for the first time it may ask you to assign regions. Select the map region you
want to use by tapping on the item from the list.
If you are travelling in other regions you will need to change the map region by using the following
steps.
1 From the Main Menu, tap on the right arrow to access the second page of the Main Menu.
2Tap on User Options.
3Tap on Region.
4 Tap on the map region desired.
All models of the Magellan Maestro provide map regions for the lower 48 United States, Hawaii and
Puerto Rico. Some models of the Magellan Maestro also contain maps for Alaska and Canada. The
Region option will display the regions that are available for the Magellan Maestro you are using.