Magellan 3200 GPS Receiver User Manual


 
Installation 3
Installation Instructions
Installation of the Magellan Maestro is simple and easy. The hardest part will be picking the best
location.
Selecting the Location
A few tips on selecting the proper location.
Mount the Magellan Maestro in a place where it can be easily seen and will not interfere
with your view of the road.
The Magellan Maestro should be mounted in such a way that the antenna, (located in the
top of the receiver), has an unobstructed view of the sky through the windshield.
Select whether it will be mounted using the adjustable mount to the windshield or an
adhesive disk. Be sure to check your local and regional laws before mounting to the
windshield. Some states, like California and Minnesota, have laws restricting the
mounting of any device on the windshield. (Adhesive Disks are available from the
Magellan Store at www.magellanGPS.com if one was not supplied with the Magellan
Maestro.)
If planning to use the adhesive disk, a smooth surface on the dash board will need to be
selected. Do not attach the adhesive disk to the windshield nor airbag covers.
Make sure that the Magellan Maestro nor any cabling will be disturbed in the event that
the airbags are deployed.
Items Needed (no tools required)
Swivel Mount
Cradle
Alcohol Pad
Adhesive Disk
(optional)
Magellan Maestro
Vehicle Power Cable
Please note that the swivel mount supplied with the Magellan Maestro may be different then the one shown in this
document.